Your cart is currently empty.
LHS-1D Lunar Highland Dust Simulant
LHS-1D Lunar Highland Dust Simulant
LHS-1D Lunar Highland Dust Simulant
Scanning electron microscope image of LHS-1D, magnification 1000X
Scanning electron microscope image of LHS-1D, magnification 500X

LHS-1D Lunar Highland Dust Simulant

Regular price$55.00
Shipping calculated at checkout.

  • In stock, ready to ship
  • Inventory on the way

1 kilogram = 2.2 pounds

All Exolith Lab products are intended for research and STEM education purposes. By purchasing, you agree that the product will be used for research and STEM education purposes.

Developed By: University of Central Florida
Available From: CLASS Exolith Lab

Spec Sheet 

The LHS-1D Lunar Highlands Dust Simulant has been developed by the CLASS Exolith Lab for use in dust mitigation experiments and other applications where very fine dust is needed. LHS-1D is made of the same base material as LHS-1, our high-fidelity, mineral-based simulant appropriate for a generic or average highlands location on the Moon. The simulant is not made of a single terrestrial lithology, but accurately captures the texture of lunar regolith by combining both mineral and rock fragments (i.e., polymineralic grains) in accurate proportions. This dust simulant contains only particles finer than 30 μm.


Component Wt.%
Anorthosite 74.4
Glass-rich basalt 24.7
Ilmenite 0.4
Pyroxene 0.3
Olivine 0.2

Bulk Chemistry

This table shows the relative abundances of each element detected by X-ray fluorescence (XRF). The relative abundances of elements detected by XRF in geological samples are quantified as oxides. In the simulant, these elements are contained in the minerals described in the Mineralogy table above, and not necessarily in oxide form. These data are from the Hamilton Analytical Lab.

Oxide Wt%
SiO2 51.2
TiO2 0.6
Al2O3 26.6
FeO 2.7
MnO 0.1
MgO 1.6
CaO 12.8
K2O 0.5
P2O5 0.1
LOI* 0.4
Total** 99.4

*Loss on ignition

**Excluding volatiles and trace elements; see spec sheet.

Physical Properties

Mean Particle Size: 7 µm

Particle Size Range: 0-30 µm

Bulk density*: 0.7 g/cm3

Grain Density: 3.22 g/cm3

Void Ratio: 3.60

Porosity: 78.3%

Angle of Repose (Avg): 46.36°

*Note that bulk density is not an inherent property and depends on the level of compaction

 We would love to hear about the success of your research. If you have any information you'd like to share with us, please send us an email at

Photo Credit: Abigail Glover, Exolith Lab

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.